For motorbikes, the oil is changed regularly for life every one cycle from 1500-2000km to ensure engine protection and efficient operation. Do you worry because the oil change outside will be sketchy, not thorough? Today, let's learn how to change oil at home quickly, simply and quickly, take care of your companion by yourself!

PREPARE:

• Old oil tank
• Viscous hopper
• Oil cap opener, oil fill hole and old oil drain plug
• The new oil tank is suitable for the current vehicle

OLD GRANKS FROM PEACE:

The first thing to do is to determine the position of the viscous screw and drain the oil by visual inspection, the viscous screw is usually the screw located at the lowest position and closest to the ground. In addition, for motorcycles that have been used for a while, there will be less oil rusting out of the position of the lubricant.

Once the oil screw is located, place the prepared container at the bottom to catch the old oil. Depending on the model, you need different openers such as the tip or 17mm ring lock that is commonly used for Honda models or 12 mm tip for Yamaha models.

Next, you open the dipstick so that the remaining oil can drain out. ZIC tells you a little tip is that you can tilt the car and gently shake it back and forth to clean the bottom oil belly, not stagnant old oil. In addition, you can use some specialized solutions to mix into the old oil before rinsing to increase the cleaning efficiency before replacing the new oil. The old oil discharged is black and thick compared to the new oil because it contains a lot of dirt and metal particles generated during engine operation.

For the old oil that has been released, the ZIC can be stored in a new oil tank and used to lubricate a bicycle slug or rusty door rails. Absolutely not discharged into the environment because the old oil contains a lot of dirt and chemicals that pollute the environment as well as the surrounding organisms.

Note: You should drain the old oil when the engine has just finished operating or let the engine run idle for 10-15 minutes, at this time, the warm, liquid oil will discharge faster and easier than the thickened oil caused by the engine. has cooled.

NEW MEMORY CHANGE

After completely discharging the old oil, re-tighten the oil drain screw that was removed before, note that you should only tighten, do not squeeze too hard because it can damage the screw teeth and cause leakage later. . Next, put the funnel into the oil filling hole, remove the new oil tank seal, and then refill the oil probe right in place.

Depending on the car model, there will be a suitable lubricant, so you should pay attention to choosing the right lubricant for your car to achieve optimal performance as well as comprehensive engine protection. Join ZIC to choose the suitable lubricant for motorbikes HERE!

Finally pull out the hopper and cover the refill hole, and you are done with a quick and easy home oil change.

Buy lubricants online with ZIC today, quick delivery at home and manually change the oil for your familiar car!